After strong earthquakes, many steel structures were built with frame welded joints of welded construction and a welded base. Although steel structures are regarded as highly resistant to earthquakes, many were constructed using frame-welded joints of fillet welded construction and welded column bases. These weld joints can have a low capacity to absorb energy during earthquakes. Infrastructure built during the era of high economic growth in Japan is deteriorating. Furthermore, costs pose difficulties because mandatory checking is necessary once every five years. Structural health monitoring for infrastructure maintenance is widely anticipated as new technology. To put such a new sensor to practical use, it is necessary to accumulate measurement data and establish evaluation methods to derive information about the states of structures. As described herein, A development method for sensor measuring displacement is proposed using composite piezoelectric film and glass. Moreover, that is investigated the relationship between the structure displacement and the output voltage from the piezoelectric joint sensor to record the sensor characteristics. Structural analysis was also done to evaluate sensor characteristics and to assess the mechanisms and effects of environmental factors on the structure's response. On the other hand, conducted a similar experiment using a measurement robot and compared the sensor characteristics. Herein, results obtained using the measurement robot (SALLY) for the relation between the output and displacement of piezo compound sensors is explained. The mounting test of the piezo junction sensor used under the optimum conditions for the robot measurement confirmed that the target displacement measurement can be measured from the sensor output by changing the piezo-composite sensor plate thickness.
| Published in |
American Journal of Science, Engineering and Technology (Volume 7, Issue 3)
This article belongs to the Special Issue Constructing the Next Generation of Artificial Intelligence |
| DOI | 10.11648/j.ajset.20220703.17 |
| Page(s) | 114-120 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2022. Published by Science Publishing Group |
Anchor Bolt, Deformed Bar, Health Monitoring, Piezoelectric Joint Sensor
| [1] | Ministry of Land, Infrastructure and Transport, Infrastructure maintenance information, available from https://www.mlit.go.jp/sogoseisaku/maintenance/02research/02_01_01.html (accessed on 1 October, 2020). (in Japanese). |
| [2] | Imai, K., Narihara, H., Kawabata, I., Takayama, M., Kimura, Y., Aono, H. and Kameda, R., Development of new type of steel column base: structural experiment of exposed-type column base, TAISEI Construction Technology Center, Technical Report, No. 39 (2006), pp. 1–6. (in Japanese). |
| [3] | Japan Society of Civil Engineers, Concrete Committee, Final Report Investigation Special Committee on Damage to the Tarui Viaduct, (2008) (in Japanese). |
| [4] | Shimoi, N. and Nakasho, K., Sally, a Robot for Measuring Piezoelectric Joint Sensor Characteristics, Research & Development, Vol. 1, No. 1, pp. 25–30 (2020). |
| [5] | Mochizuki, M., Toyoda, M., Morikage, Y. and Kubo, T., Residual stress and fatigue strength in welded joints using low-temperature transformation weld material, Japan Welding Society, No. 72, pp. 242–243 (2003). (in Japanese). |
| [6] | Shimoi, N., Cuadra, C and Nakasho, K., Comparison in displacement measurements for weld joint of steel column base using piezoelectric joint sensors, International Journal of Science and Engineering Investigations, Vol. 57, No. 5, pp. 253–259 (2021). (in Japanese). |
| [7] | Kumagai, K., Nakamura, H. and Kobayashi, H., Computer aided nondestructive evaluation method of welding residual stresses by removing reinforcement of weld, Transactions of the Japan Society of Mechanical Engineers, Series A, Vol. 65, No. 629 (1999), pp. 133–140. (in Japanese). |
| [8] | Ono, K., Study of technology for extending the life of existing structures, New urban society technology fusion research, The Second New Urban Social Technology Seminar, pp. 11–23 (2003). (in Japanese). |
| [9] | Shimoi, N., Nakasho, K., Cuadra, Saijo, M and Madokoro, H., Avalanche and Falling Rock Measurement Using Piezoelectric Dynamics and Static Sensors, Piezoelectric Dynamics and Static Sensors, American Journal of Remote Sensing, vol. 5, No. 2, pp. 10-15 (2017). |
| [10] | Nakamura, M., Health monitoring of building structures, Society of Instrument and Control Engineers, Vol. 41, No. 11, pp. 819–824 (2002). (in Japanese). |
| [11] | Shimoi, N., Cuadra, C., Madokoro, H. and Nakasho, K., Comparison in displacement measurements for fillet weld of steel column base utilizing piezoelectric joint sensors, International Journal of Science and Engineering Investigations, Vol. 9, No. 102 (2020), pp 99-103. (in Japanese). |
| [12] | placement measurements in exposed type column base using piezoelectric dynamic sensors and static sensors, American Journal of Remote Sensing, Vol. 4, No. 5, pp. 23–32 (2016). |
| [13] | Khanna, P. K., Hornbostel, B., Grimme, R., Schäfer, W. and Dorner, J., Miniature pressure sensor and micromachined actuator structure based on low-temperature-cofired ceramics and piezoelectric material, Materials Chemistry and Physics, No. 87, No. 1, pp. 173–178 (2004). |
| [14] | Tamai, H., Elasto Plastic Analysis Method for frame with exposed-type column base considering influence of variable axial force, Journal of Structural and Construction Engineering, Vol. 68, No. 571 (2003), pp. 127–135. (in Japanese). |
| [15] | Steel committee of Kinki Branch the Architectural Institute of Japan, Reconnaissance report on damage to steel building structures observed from the 1995 Hyogoken-Nanbu earthquake, (2005), pp. 22–108. (in Japanese). |
APA Style
Nobuhiro Shimoi, Kazuhisa Nakasho, Carlos Cuadra. (2022). Comparison of Sensor Output Because Base Plate Thickness and Shape Change of Piezoelectric Composite Sensor for Long-Term Measurement. American Journal of Science, Engineering and Technology, 7(3), 114-120. https://doi.org/10.11648/j.ajset.20220703.17
ACS Style
Nobuhiro Shimoi; Kazuhisa Nakasho; Carlos Cuadra. Comparison of Sensor Output Because Base Plate Thickness and Shape Change of Piezoelectric Composite Sensor for Long-Term Measurement. Am. J. Sci. Eng. Technol. 2022, 7(3), 114-120. doi: 10.11648/j.ajset.20220703.17
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajset.20220703.17,
author = {Nobuhiro Shimoi and Kazuhisa Nakasho and Carlos Cuadra},
title = {Comparison of Sensor Output Because Base Plate Thickness and Shape Change of Piezoelectric Composite Sensor for Long-Term Measurement},
journal = {American Journal of Science, Engineering and Technology},
volume = {7},
number = {3},
pages = {114-120},
doi = {10.11648/j.ajset.20220703.17},
url = {https://doi.org/10.11648/j.ajset.20220703.17},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajset.20220703.17},
abstract = {After strong earthquakes, many steel structures were built with frame welded joints of welded construction and a welded base. Although steel structures are regarded as highly resistant to earthquakes, many were constructed using frame-welded joints of fillet welded construction and welded column bases. These weld joints can have a low capacity to absorb energy during earthquakes. Infrastructure built during the era of high economic growth in Japan is deteriorating. Furthermore, costs pose difficulties because mandatory checking is necessary once every five years. Structural health monitoring for infrastructure maintenance is widely anticipated as new technology. To put such a new sensor to practical use, it is necessary to accumulate measurement data and establish evaluation methods to derive information about the states of structures. As described herein, A development method for sensor measuring displacement is proposed using composite piezoelectric film and glass. Moreover, that is investigated the relationship between the structure displacement and the output voltage from the piezoelectric joint sensor to record the sensor characteristics. Structural analysis was also done to evaluate sensor characteristics and to assess the mechanisms and effects of environmental factors on the structure's response. On the other hand, conducted a similar experiment using a measurement robot and compared the sensor characteristics. Herein, results obtained using the measurement robot (SALLY) for the relation between the output and displacement of piezo compound sensors is explained. The mounting test of the piezo junction sensor used under the optimum conditions for the robot measurement confirmed that the target displacement measurement can be measured from the sensor output by changing the piezo-composite sensor plate thickness.},
year = {2022}
}
TY - JOUR T1 - Comparison of Sensor Output Because Base Plate Thickness and Shape Change of Piezoelectric Composite Sensor for Long-Term Measurement AU - Nobuhiro Shimoi AU - Kazuhisa Nakasho AU - Carlos Cuadra Y1 - 2022/08/31 PY - 2022 N1 - https://doi.org/10.11648/j.ajset.20220703.17 DO - 10.11648/j.ajset.20220703.17 T2 - American Journal of Science, Engineering and Technology JF - American Journal of Science, Engineering and Technology JO - American Journal of Science, Engineering and Technology SP - 114 EP - 120 PB - Science Publishing Group SN - 2578-8353 UR - https://doi.org/10.11648/j.ajset.20220703.17 AB - After strong earthquakes, many steel structures were built with frame welded joints of welded construction and a welded base. Although steel structures are regarded as highly resistant to earthquakes, many were constructed using frame-welded joints of fillet welded construction and welded column bases. These weld joints can have a low capacity to absorb energy during earthquakes. Infrastructure built during the era of high economic growth in Japan is deteriorating. Furthermore, costs pose difficulties because mandatory checking is necessary once every five years. Structural health monitoring for infrastructure maintenance is widely anticipated as new technology. To put such a new sensor to practical use, it is necessary to accumulate measurement data and establish evaluation methods to derive information about the states of structures. As described herein, A development method for sensor measuring displacement is proposed using composite piezoelectric film and glass. Moreover, that is investigated the relationship between the structure displacement and the output voltage from the piezoelectric joint sensor to record the sensor characteristics. Structural analysis was also done to evaluate sensor characteristics and to assess the mechanisms and effects of environmental factors on the structure's response. On the other hand, conducted a similar experiment using a measurement robot and compared the sensor characteristics. Herein, results obtained using the measurement robot (SALLY) for the relation between the output and displacement of piezo compound sensors is explained. The mounting test of the piezo junction sensor used under the optimum conditions for the robot measurement confirmed that the target displacement measurement can be measured from the sensor output by changing the piezo-composite sensor plate thickness. VL - 7 IS - 3 ER -
Email: